Channel immersion temperature sensor 050mm

Best.-Nr. xxx.17119

For measuring the temperature in the duct. Can also be used for liquid media in conjunction with a brass or stainless steel immersion sleeve. The housing meets the NEMA 4X / IP65 requirements.

Typical applications:
– heating construction
– plant engineering
– Mechanical engineering
– Building automation
– ventilation

Technical specifications
Electrical connection: spring-type terminal plug-in max. 2.5 mm²
Cable entry: cable gland with strain relief
Ø6 … 8 mm
Passive temperature output signal: Pt1000
Application: air / water
Measured values: temperature
Measuring range temperature: -50 … 160 ° C [-60 … 320 ° F]
Passive temperature accuracy: Class B, ± 0.3 ° C @ 0 ° C [± 0.5 ° F @ 32 ° F]
Time constant t (63%) in the air duct: typically 210 s at 0 m / s;
typically 46 s at 3 m / s
Time constant t (63%) in water pipe: with immersion sleeve and thermal paste typically 7 s with immersion sleeve brass; typically 9 s with immersion sleeve made of stainless steel
Cable gland: Plug adapter: PA66, black
Mother: PA6, black
Housing: cover: Lexan, orange; Below: Lexan, orange; Seal: 0467 NBR70, black; UV-resistant
Ambient humidity: max. 95% r.H., non-condensing
Ambient temperature: -35 … 50 ° C [-30 … 120 ° F]
Medium temperature: -50 … 160 ° C [-60 … 320 ° F]
Housing surface temperature: Max. 90 ° C [195 ° F]
Protection class IEC / EN: III safety extra low voltage (SELV)
Protection class UL: UL Class 2 Supply
EU conformity: CE marking
IEC / EN certification: IEC / EN 60730-1
UL certification: cULus acc. to UL60730-1A / -2-9, CAN / CSA
E60730-1: 02 / -2-9
Degree of protection IEC / EN: IP65
Quality standard: ISO 9001

Scope of delivery: Duct temperature sensor with housing 050mm with mounting clip, screws and adhesive film

Dimensions (HxWxD): 92x60x98mm

Downloads & Links

DatenblattAnklemmplan